Hook Logo
1500 Australian Ave
Riviera Beach, Fl 33404
Phone: (561) 848-2111
Fax: (561) 848-2148
facebook
twitter
google+
shopnow2.jpg   
Shopping / Fenderhooks
Fenderhook (SSCCER)
Fenderhook Brushed 316L stainless steel, stainless cam cleat (SSCCER)
100210000
Brushed 316L stainless steel, stainless cam cleat allows for fender line adjustment, safety pin, elk hide leather lining, fits round railings .75” to 1.50” diameter.

The brushed 316L stainless steel is 3.0” wide and about 8.50” high, has rounded corners, glued elk hide lining, punched and chamfered .875” hole, polished edges, a through bolted all stainless steel cam cleat, a safety pin that holds the Fender-Hook securely to the railings. This safety pin holds with friction and itself is secured to the Fender-Hook with stainless steel lanyard to prevent loss. The pull ring on the safety pin in about 1.0” in diameter. A detent ball keeps the safety pin from being pulled completely out.

This Fender-Hook is very easy to use. The fender line is threaded through the punched hold (this captures the fender line and guides the line to the cam cleat. Tying a stopper knot in the fender line will prevent the loss of the fender in the event of the fender line is accidentally released from the cam cleat.
In Stock: 1000
$160.00
Quantity
Fenderhook (SSCCEWR)
Fenderhook Brushed 316L stainless steel, stainless steel cam cleat (SSCCEWR)
100210010
Brushed 316L stainless steel, stainless steel cam cleat, elk hide leather, fits wooden railings like Hatteras or Grand Banks from 2.25” to 3.50”.

Not designed as a custom fit, so expect some looseness.

This is a premium product featuring 316L grade marine stainless steel with 316 stainless steel cam cleat. It measures 3.0” wide and stands about 6.5” high. The corners have large radius to reduce injury or damage should they be dropped.

The fender line is lead through the guide hole to the cam cleat which allows infinite adjustment of the fender.

(Suggestion: tie a stopper knot to prevent loss of the fender in the unlikely event the fender line is accidentally released from the cam cleat, or if the Fender-Hook is taken off the rail then accidentally dropped into the water, the fender will allow retrieval of both the Fender-Hook and fender.)

This Fender-Hook is not designed for one size rail, so if your rail is at the maximum width of the inside dimensions it will fit tightly, conversely, if your rail is smaller, expect some looseness, but it will still hold your fenders.
In Stock: 1000
$170.00
Quantity
Fenderhook (SSCCSWR)
Fenderhook Brushed 316L stainless steel, 3.0” wide and about 8.50” high (SSCCSWR)
100210020
Brushed 316L stainless steel, stainless cam cleat allows for fender line adjustment, safety pin, sheep wool lining, fits round railings .75” to 1.50” diameter.

The brushed 316L stainless steel is 3.0” wide and about 8.50” high, has rounded corners, glued sheep wool lining, punched and chamfered .875” hole, polished edges, a through bolted all stainless steel cam cleat, a safety pin that holds the Fender-Hook securely to the railings. This safety pin holds with friction and itself is secured to the Fender-Hook with stainless steel lanyard to prevent loss. The pull ring on the safety pin is about 1.0” in diameter.

A detent ball keeps the safety pin from being pulled completely out.

This Fender-Hook is very easy to use. The fender line is threaded through the punched hold (this captures the fender line and guides the line to the cam cleat.

Tying a stopper knot in the fender line will prevent the loss of the fender in the event of the fender line is accidentally released from the cam cleat.
In Stock: 1000
$165.00
Quantity
Fenderhook (SSCCWWR)
Fenderhook Brushed 316L stainless steel (SSCCWWR)
100210030
Brushed 316L stainless steel, stainless steel cam cleat, sheep wool lining, fits wooden railings like Hatteras or Grand Banks from 2.25” to 3.50”. Not designed as a custom fit, so expect some looseness.

This is a premium product featuring 316L grade marine stainless steel with 316 stainless steel cam cleat. It measures 3.0” wide and stands about 6.5” high. The corners have large radius to reduce injury or damage should they be dropped. The fender line is lead through the guide hole to the cam cleat which allows infinite adjustment of the fender.

(Suggestion, tie a stopper knot to prevent loss of the fender in the unlikely event the fender line is accidentally released from the cam cleat, or if the Fender-Hook is taken off the rail then accidentally dropped into the water, the fender will allow retrieval of both the Fender-Hook and fender.)

This Fender-Hook in not designed for one size rail, so if your rail is at the maximum width of the inside dimensions it will fit tightly. Conversely, if your rail is smaller, expect some looseness, but it will still hold your fenders.
In Stock: 1000
$175.00
Quantity
Fenderhook (SSE1RR)
Fenderhook Brushed 316L stainless steel (SSE1RR)
100210040
Brushed 316L stainless steel, one hole, safety pin, elk hide leather lining, fits round railings .75” to 1.50” diameter.

The brushed stainless steel of 316L grade has rounded corners and polished edges, 2.0” wide and stands approximately 8.0”high, the punched hole is .875” with chamfered edges, the elk hide leather is approximately .125” thick is glue on to the stainless steel. The safety pin is .25” in diameter with a pull ring of 1.0” diameter. It is held in place by friction and has a ball detent to prevent loss.

This is a very practical way of holding fenders to the rail of your vessel. Tying a bowline in your fender line secures the fender so it may be deployed quickly upon approaching a dock—no hurriedly tied knots that may slip loose, or the sometimes “helpful” crew who are knot-less, or can’t judge where the piling is in relation to the vessel.

This Fender-Hook may be left permanently tied to the fender line for quick deployment.
In Stock: 1000
$100.00
Quantity
Fenderhook (SSE3R)
Fenderhook Brushed 316L stainless steel (SSE3R)
100210050
Brushed 316L stainless steel, three holes allows for easier fender line adjustment, safety pin, elk hide leather lining, fits round railings .75” to 1.50” diameter.

The brushed stainless steel of 316L grade has rounded corners and polished edges, 2.0” wide, stands approximately 8.0” high, three punched holes are .875” with chamfered edges, the elk hide leather is approximately .125” thick is glue on to the stainless steel. The safety pin is .25” in diameter with a pull ring of 1.0” diameter. It is held in place by friction and has a ball detent to prevent loss.

This is a very practical way of holding fenders to the rail of your vessel. Via the three hole, the fender line of rove up and back through the holes, holding the fender line through friction. Reeving your fender line secures the fender so it may be deployed quickly upon approaching a dock—no hurriedly tied knots that may slip loose, or the sometimes “helpful” crew who are knot-less, or can’t judge where the piling is in relation to the vessel.

This Fender-Hook may be left permanently tied to the fender line for quick deployment and yet when you need to adjust it no harden knots to fight!
In Stock: 1000
$115.00
Quantity
Fenderhook (SSEWR)
Fenderhook Brushed 316 stainless steel (SSEWR)
100210060
Brushed 316 stainless steel, elk hide leather, fits wood hand rails (i.e. Grand Banks, Hatteras) from 2.25” to 3.50”. Not designed as a custom fit so expect some looseness.

This basic wooden rail Fender-Hook will hold fenders. The brushed stainless steel marine grade 316L has rounded corners, a punched chamfered .875” hole and polished edges. It is lined with elk hide where it touches the wood/varnished surfaces. The elk hide is approximately .125” thick. Dimensions are 3.0” wide and stands approximately 5.75” high. A typical rail from a Hatteras measures about 1.5” thick, by 2.75” across the top. Grand Banks have a similar size.

The Fender-Hook is slide edgewise and rotated down which locks the Fender-Hook on to the wooden rail. This design resists being pulled upward off the rail vertically. The fender line is tied with a bowline though the hole.

This same model is offered with sheep's wool lining in place of the elk hide. All the other features remain identical.
In Stock: 1000
$125.00
Quantity
Fenderhook (SSSW1R)
Fenderhook Brushed 316L stainless steel (SSSW1R)
100210070
Brushed 316L stainless steel, one hole, safety pin, sheep wool lining, fits round railings .75” to 1.50” diameter.

The brushed stainless steel of 316L grade has rounded corners and polished edges, 2.0” wide and stands approximately 8.0” high, the punched hole is .875” with chamfered edges, the sheep's wool lining is approximately .125” thick is glued on to the stainless steel. The safety pin is .25” in diameter with a pull ring of 1.0” diameter. It is held in place by friction and has a ball detent to prevent loss.

This is a very practical way of holding fenders to the rail of your vessel. Tying a bowline in your fender line secures the fender so it may be deployed quickly upon approaching a dock—no hurriedly tied knots that may slip loose, or the sometimes “helpful” crew who are knot-less, or can’t judge where the piling is in relation to the vessel.

This Fender-Hook may be left permanently tied to the fender line for quick deployment.
In Stock: 1000
$105.00
Quantity
Fenderhook (SSSW3R)
Fenderhook Brushed 316L stainless steel (SSSW3R)
100210080
Brushed 316L stainless steel, three holes allows for easier fender line adjustment, safety pin, sheep's wool lining, fits round railings .75” to 1.50” diameter.

The brushed stainless steel of 316L grade has rounded corners and polished edges, 2.0” wide, stands approximately 8.0” high, three punched holes are .875” with chamfered edges, the elk hide leather is approximately .125” thick is glue on to the stainless steel. The safety pin is .25” in diameter with a pull ring of 1.0” diameter. It is held in place by friction and has a ball detent to prevent loss.

This is a very practical way of holding fenders to the rail of your vessel. Via the three hole the fender line of rove up and back through the holes, holding the fender line through friction. This allows for easier fender adjustment that may be necessary depending on the docking situation. Reeving your fender line secures the fender so it may be deployed quickly upon approaching a dock—no hurriedly tied knots that may slip loose, or the sometimes “helpful” crew who are knot-less, or can’t judge where the piling is in relation to the vessel.

This Fender-Hook may be left permanently tied to the fender line for quick deployment and yet when you need to adjust it no harden knots to fight!
In Stock: 1000
$115.00
Quantity
Fenderhook (SSSWWR)
Fenderhook Brushed 316 stainless steel (SSSWWR)
100210090
Brushed 316 stainless steel, sheep wool lining, fits wood hand rails (i.e. Grand Banks, Hatteras) from 2.25” to 3.50”. Not designed as a custom fit so expect some looseness.

This basic wooden rail Fender-Hook will hold fenders. The brushed stainless steel marine grade 316L has rounded corners, a punched chamfered .875” hole and polished edges. It is lined with sheep wool leather where it touches the wood/varnished surfaces. The sheep wool leather is approximately .125” thick, and is sheared to about .075”. Dimensions are 3.0” wide and stands approximately 5.75” high. A typical rail from a Hatteras measures about 1.5” thick, by 3.0” across the top. Grand Banks have a similar size.

The Fender-Hook is slid edgewise and rotated down which locks the Fender-Hook on to the wooden rail. This design resists being pulled upward off the rail vertically. The fender line is tied with a bowline though the hole.
In Stock: 1000
$135.00
Quantity